Descargar Imprimir esta página

Craftsman CMXEVCVVJF910 Manual De Instrucciones página 6

Aspiradora en seco/mojado de 9 galones

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
WARNING:
MASK IF BLOWING CREATES DUST THAT
MIGHT BE INHALED.
WARNING:
POWER CORD IS DISCONNECTED FROM THE
OUTLET.
CAUTION:
COLLECTION TANK IS EMPTY BEFORE
USING AS A BLOWER. CLEAR ALL DIRT AND
DEBRIS FROM THE HOSE AND COLLECTION
TANK.
11. Remove the hose
10
.
12. Insert the larger end of the hose
3
the blower port
power head and lock into place. Fig. 5.
Fig. 5
13. Choose the desired accessory and insert
onto the end of the hose
Fig. 6
14. Before turning on the vacuum, firmly hold
onto the loose end of the hose. Plug the
power cord into the outlet. Turn the motor
on by flipping the switch to the 'I' ON
position.
6
WEAR A DUST
VERIFY THAT THE
MAKE SURE THE
15
from the vacuum port
15
into
on the back of the
15
. Fig. 6.
WARNING:
COMPLETED BLOWING, FLIP THE POWER
SWITCH TO THE 'O' OFF POSITION AND
UNPLUG THE POWER CORD FROM THE
OUTLET.
FILTER INSTALLATION AND CLEAN
UP
Dry Pick Up Operation
NOTICE: Clean or change the filter regularly
for best performance. ALWAYS USE THE
CARTRIDGE FILTER FOR DRY VACUUMING. If
the machine is used without the cartridge filter,
the motor will burn out and the warranty will be
voided. Always keep spare filters on hand.
NOTICE: The filters included are made of high
quality materials designed to stop small dust
particles. The cartridge filter should be used
for dry pick-up only. A dry cartridge filter is
necessary to pick up dust. If the cartridge filter
is wet, it will clog quickly and be very difficult
to clean. Handle the filter carefully when
removing it for cleaning and replacing it. Check
the filters for tears or small holes. A small hole
can let dust pass through and out of the filter.
Do not use a filter with holes or tears; replace
it immediately.
INSTALLING AND CLEANING THE
CARTRIDGE FILTER:
WARNING:
POWER CORD IS DISCONNECTED FROM THE
OUTLET.
15. Remove the power head and place in an
upside down position.
16. Install the cartridge filter
cage making sure the cage is completely
covered. Fig. 7.
ONCE YOU HAVE
VERIFY THAT THE
19
over the filter

Publicidad

loading