Sony DSX-M50BT Manual De Instrucciones página 11

2
Press CALL, rotate the control dial to
select [PAIRING], then press it.
flashes.
The unit enters pairing standby mode.
3
Perform pairing on the BLUETOOTH
device so it detects this unit.
4
Select [Sony Automotive] shown in
the display of the BLUETOOTH
device.
If [Sony Automotive] does not appear,
repeat from step 2.
5
If passkey* input is required on the
BLUETOOTH device, input [0000].
* Passkey may be called "passcode," "PIN
code," "PIN number" or "Password," etc.,
depending on the device.
Input passkey
[0000]
When pairing is made,
6
Select this unit on the BLUETOOTH
device to establish the BLUETOOTH
connection.
or lights up when the connection is
made.
stays lit.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for
this unit from another device.
To cancel pairing
Perform step 2 to cancel the pairing mode
after this unit and the BLUETOOTH device are
paired.
Connecting with a paired
BLUETOOTH device
To use a paired device, connection with this
unit is required. Some paired devices will
connect automatically.
1
Press CALL, rotate the control dial to
select [BT SIGNL], then press it.
Make sure that
2
Activate the BLUETOOTH function
on the BLUETOOTH device.
3
Operate the BLUETOOTH device to
connect to this unit.
or lights up.
Icons in the display:
Lights up when a cellular phone is
connected to the unit.
Lights up when an audio device is
connected to the unit.
lights up.
11
GB