Before Use - Celestron TRAILSEEKER Manual De Instrucciones

WARNING
Never look at the Sun while using your spotting scope.
Looking at the Sun can cause permanent eye damage.

BEFORE USE

Attach your spotting scope to a sturdy tripod before viewing as
the size and power of the spotting scope requires a solid tripod
for stability to achieve clear, sharp images (Fig. 2).
ATTACHING THE EYEPIECE
To attach the eyepiece to the spotting scope, turn the eyepiece
lock collar counterclockwise until it is loose and remove the
eyepiece mount cover if inserted. Make sure that the protective
lens cap is removed from the eyepiece and slide it into the
eyepiece mount (Fig. 3a). When the eyepiece is fully seated, turn
the lock collar clockwise to secure the eyepiece and hold it in
place (Fig. 3b). Do not attempt to attach or remove the eyepiece
without first loosening the lock collar as it can cause damage to
the eyepiece and/or the spotting scope.
Fig. 2
Fig. 3a
Fig. 3b
ENGLISH I
3