Maintenance - Ryobi P2108 Manual Del Operador

Sopladora de 18 v one+
Ocultar thumbs Ver también para P2108:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING THE BLOWER
See Figure 5.
 To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the center
of a pile.
 To reduce sound levels, limit the number of pieces of
equipment used at any one time.
 Use rakes and brooms to loosen debris before blowing.
In dusty conditions, slightly dampen surfaces when water
is available.
 Conserve water by using power blowers instead of hoses for
many lawn and garden applications, including areas such
as gutters, screens, patios, grills, porches, and gardens.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes resulting in possible serious injury.
WARNING:
To avoid serious personal injury, always remove the bat-
tery pack from the product when cleaning or performing
any maintenance.
OPERATION
 Watch out for children, pets, open windows, or freshly
 After using blowers or other equipment, CLEAN UP!
Battery tools are always in operating condition. Therefore,
switch should always be in the OFF position when not in
use or carrying at your side.

MAINTENANCE

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which can result in serious personal injury.
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an Authorized Service Center.
STORAGE
 Clean all foreign material from the blower.
 Store indoors in a secure place that is inaccessible to
 Do not hang unit so that the switch trigger is depressed.
9 — English
washed cars, and blow debris safely away.
Dispose of debris properly.
WARNING:
WARNING:
children. Keep away from corrosive agents such as gar-
den chemicals and de-icing salts.

Publicidad

Tabla de contenido
loading

Tabla de contenido