English - Milwaukee AG 13-125 XSPD Manual Original

TECHNICAL DATA
Angle Grinder
Production code
Rated input
Rated speed
D= Grinding disc diameter max.
d= Grinding disc hole diameter
b= Cutting disc thickness min. / max.
b= Grinding disc thickness max.
D= Grinding surface diameter max.
D= Wiring brush diameter max.
D
GB
Thread of work spindle
Weight according EPTA-Procedure 01/2014
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding:
Vibration emission value a
Uncertainty K=
Disc sanding:
Vibration emission value a
Uncertainty K=
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING
The vibration and noise emission level given in this information sheet has
been measured in accordance with a standardized test given in EN 60745
and may be used to compare one tool with another.It may be used for a
preliminary assessment of exposure.
The declared vibration and noise emission level represents the main
applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration and noise
emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration and noise should also
take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects
of vibration and/or noise such as: maintain the tool and the accessories, keep
the hands warm, organization of work patterns.
Wear ear protectors. Exposure to noise can cause hearing loss.

English

12 12
h,SG
h,DS
AG 13-125 XSPD AGV 13-125
(220-240 V) XSPDE
(220-240 V)
4584 84 03... 4584 96 03...
...000001-999999 ...000001-999999
1250 W 1250 W
12000 min 12000 min
-1 -1
125 mm 125 mm
22,2 mm 22,2 mm
1 / 3 mm 1 / 3 mm
6 mm 6 mm
125 mm 125 mm
75 mm 75 mm
M 14 M 14
2,4 kg 2,5 kg
89,0 dB(A) 89,0 dB(A)
100,0 dB(A) 100,0 dB(A)
7,8 m/s 7,8 m/s
2 2
1,5 m/s 1,5 m/s
2 2
3,6 m/s 3,6 m/s
2 2
1,5 m/s 1,5 m/s
2 2
WARNING Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding, Wire Brus-
hing or Abrasive Cutting-Off Operations:
a) This power tool is intended to function as a grinder, sander,
wire brush or cut-off tool. Read all safety warnings, instruc-
tions, illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
b) Operations such as polishing are not recommended to be
performed with this power tool.Operations for which the power
tool was not designed may create a hazard and cause personal injury.
AGV 13-115 AGV 13-115
XSPDE XSPDE
(110-120 V) (220-240 V)
4584 92 03... 4586 65 03...
...000001-999999 ...000001-999999
1250 W 1250 W
12000 min 12000 min
-1 -1
115 mm 115 mm
22,2 mm 22,2 mm
1 / 3 mm 1 / 3 mm
6 mm 6 mm
115 mm 115 mm
75 mm 75 mm
M 14 M 14
2,4 kg 2,4 kg
89,5 dB(A) 89,0 dB(A)
100,5 dB(A) 100,0 dB(A)
6,8 m/s 7,8 m/s
2 2
1,5 m/s 1,5 m/s
2 2
4,5 m/s 3,6 m/s
2 2
1,5 m/s 1,5 m/s
2 2