Technical Specifications - SENSEA NEO Serie Instrucciones De Montaje, Utilización Y Mantenimiento

2. Electrical safety instructions
FR
The luminaire must be installed by a quali ed electrician in accordance with the wiring standards in
ES
force in the country where the installation takes place.
ENVIRONMENT
PT
IT
EL

TECHNICAL SPECIFICATIONS

PL
Nominal voltage
RU
Nominal frequency
Nominal output power
UA
Lamp
RO
Protection class
IP Protection rating
BR
MAINTAINANCE / CLEANING
EN
• Have this appliance repaired by a quali ed professional.
• All repairs must be carried out solely by a quali ed professional, using original spare parts. Improper repairs may present signi cant risks.
• The lamps used must always comply with the characteristics stated in this manual.
• Do not replace the lamps in wet weather.
• If the exible external cable or the cord of this luminaire is damaged, it must be replaced only by the manufacturer or its maintenance service or any equivalent
quali ed person in order to avoid any danger.
MISCELLANEOUS AFTERSALES SERVICE, REPAIRS, GUARANTEE, ETC.
Have this appliance repaired by a quali ed professional.
This electrical product complies with the safety standards in force. Repairs must only be carried out by quali ed technicians using original spare parts. Any failure to follow
these instructions can be particularly dangerous to users.
If necessary, contact the after-sales service of the store where you purchased this product.
Information for the external connection box:
• Connect the electricity supply to the terminal block, respecting the following connection colour code:
- Connect the Brown Wire (Live) to the corresponding terminal marked L on the terminal block.
- Connect the blue wire (Neutral) to the corresponding terminal marked N on the terminal block.
- C onnect the Green/Yellow wire (Earth) to the Earth terminal marked E or
• Attach the mirror to the wall.
• Turn the electricity supply back on and switch on the luminaire. Your luminaire is now ready to be used.
WARNING!
This product bears a symbol relating to the disposal of waste of electrical and electronic products. This means that this product must not
be disposed of with household waste, but must be deposited in a recovery system in accordance with EU Directive 2012/19/EU. It means
that this product must be recycled or dismantled in order to reduce its impact on the environment. The electrical equipment contains
hazardous substances which may pose a risk to the environment and human health.
220-240 V~
Hz
50
NEO 17 AT 120_75_2P60
15W MAX
NEO 17 AT 105_75_P45_P60
NEO 17 AT 105_75_P60_P45
LED 4250 °K - 84
Classe II
IP 24
! WARNING:
The use of accessories other than those speci ed in this manual may present a risk of personal injury.
Level of protection (foreign objects) - 1st digit
The rst digit of the IP number indicates the level of protection against the ingress of
foreign solid objects inside the electrical parts or the casing of the appliance.
Level of protection (liquids) - 2nd digit
15W MAX
The second digit corresponds to the level of protection of live parts against the ingress of
15W MAX
various forms of humidity (for example condensation, vaporisation, immersion, etc.).
IP Rating 1st digit
2
Protected against solid objects
greater than 12 mm
IP Rating 1st digit
4
Protected against splashing water
from all directions.