Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

If the saw is used with an extension cord, ensure the con-
nection of the tool's power cord and the extension cord are
not on the ground.
If a protected outlet is not available, do not use the saw
until an outlet can be changed or auxiliary protection can
be obtained. These auxiliary protection devices are available
at your local retailer.
POSITION OF THE TILE SAW
See Figure 2, page 18.
To avoid the possibility of the tool plug or outlet getting
wet, position tile saw to one side of a wall-mounted outlet
to prevent water from dripping onto the outlet or plug. The
operator should arrange a "drip loop" in the cord connecting
PRODUCT SPECIFICATIONS
Cutting Wheel Diameter ...............................................7 in.
Cutting Wheel Arbor ................................................. 5/8 in.
Throat Capacity ................................................... 11-1/4 in.
Rip Capacity (tile size) ................................................22 in.
KNOW yOUR TILE SAW
See Figure 3, page 19.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
7 in. TILE CUTTING WHEEL - A 7 in. tile cutting wheel is
included with your saw.
WARNING:
Do not use wheels rated less than the speed of this tool.
Failure to heed this warning could result in personal
injury.
BEVEL ADJUSTMENT KNOB - The bevel adjustment knob
on the back of the motor head allows you to make 45º bevel
cuts.
CLEAN WAVE WALL™ - The Clean Wave Wall™ system
helps prevent sediment from entering the pump to extend
pump life.
EASy GLIDE TABLE™ - For precise and accurate cuts.
END-OF-CUT REMINDER - End of cut reminder prevents
chips and broken tiles by slowing down the Easy Glide Table
at the end of a cut.
FLOW ADJUSTMENT VALVE - Turns water flow to the cut-
ting wheel either on or off. When used with the water pump,
this feature becomes a variable flow adjustment.
ELECTRICAL
the saw to the outlet. The "drip loop" is that part of the cord
below the level of the outlet, or the connector if an extension
cord is used, to prevent water traveling along the cord and
coming in contact with the outlet.
If the plug or outlet does get wet, DO NOT unplug the cord.
Disconnect the fuse or circuit breaker that supplies power
to the tool then unplug and examine for the presence of
water in the outlet.
WARNING:
To reduce the risk of electrocution, keep all connections
dry and off the ground. Do not touch the plug with wet
hands.

FEATURES

Diagonal Capacity (tile size) .......................................16 in.
Maximum Depth of Cut ......................................... 2-1/4 in.
Rating .............................................120 V~, 60 Hz, 9 Amps
No Load Speed ....................................5,800 r/min. (RPM)
MOTOR - This machine has a strong motor with sufficient
power to handle tough cutting jobs. It also has externally
accessible brushes for ease of servicing.
ON/OFF SWITCH - This saw has an easy access power
switch located below the front rail. To lock the switch in the
OFF position, remove the switch key from the switch. Place
the key in a location that is inaccessible to children and oth-
ers not qualified to use the tool.
PUMPLESS FLOW SySTEM™ - The pumpless flow system
sprays clean, fresh water on cutting wheel for trouble-free
cutting. This fully enclosed water system keeps internal
cords and hoses dry and securely out of the way.
PUMP - The pump included with your saw can be installed
to recirculate the water in the tray after it flows over the
cutting wheel.
RIP GUIDE - Rip guide is fully adjustable for straight and
miter cuts.
SPLASH GUARD - The splash guard provides protection
from overspray and mist.
UPPER WHEEL GUARD - Protects user from wheel contact
on upper portion of wheel.
LASER GUIDE - For more accurate cuts, a laser guide is
included with your saw. When used properly, the laser guide
makes accurate, precision cutting simple and easy.
9 — English

Publicidad

Tabla de contenido
loading

Tabla de contenido