Bosch NGM30 Instrucciones De Conversión página 7

5. Insert each of the LP gas orifices provided with this kit
into the socket (using the small piece of foam tape to
assure a tight fit).
a) Check to be sure the small piece of foam tape used
earlier is fitted to wrap against one side of the
socket.
b) When pressing the socket driver onto the orifice,
the tape will help the orifice fit more snugly inside
the socket. This will help prevent the orifice from
falling out of the socket during insertion.
This will help prevent the orifice from falling out of the
socket during insertion.
Step 3 - Replace the Burner Caps and
Grates
Replace the grates and burner caps. Be sure the
grates are correctly placed and the rubber feet on the
grates engage the indents in the cooktop for proper
position.
Step 4 - Convert Valves for LP Gas
The bypass jet on each valve must be adjusted. Your
cooktop may come with either hollow or solid valve shafts.
Determine the bypass screw location accordingly.
1. Turn all knobs to the "Off" position.
2. Remove knobs.
English 5