Quick Start Instructions - Health O Meter PROPLUS 1100KL Instrucciones De Uso

SET UP (CONTINUED) / BATTERIES
5. Press the KG/LB button to select the weight mode (pounds or kilos). To change the display mode in
pounds to fractions or decimals, please refer to the ProPlus® Display Module User Manual. Note:
The scale will always default to the settings and units last used (LB or KG).
6. When you disconnect the scale's power adapter from the power source, the scale will switch to
battery power, if batteries are installed.
Note: If the set up procedure failed, refer to the troubleshooting instructions. If the problem is not
corrected, refer to qualified service personnel.
Replacing / Inserting Batteries
1. Unplug the scale.
2. Remove the battery cover from the display assembly—refer to Figure 4 (A) above.
3. Disconnect battery holder cable connector from the scale-battery connector (B).
4. Carefully remove the battery holder (C) by sliding it out of the display assembly.
5. Replace the batteries with new ones. We recommend EVEREADY Energizer
6. Carefully slide the battery holder (C) into the display assembly.
7. Plug the battery holder cable connector to the scale-battery connector (B).
8. Attach the battery cover to the display assembly and install the screw (A).
Warning: If the scale will not be used for some time, remove batteries to avoid a safety hazard.

QUICK START INSTRUCTIONS

NOTE: This scale will always default to the settings and units last used (lb or kg), when it is turned on.
1. Make sure there is no object on the weighing platform.
2. Press the ON/OFF button to turn the scale on.
3. Wait until "0LB 0OZ" or "0.0Kg" and "ZERO" on the left side of the display appear.
4. Ask the patient to step on the scale. The scale will calculate the patient's weight but the display will
not show a weight until the stable weight of the person is determined. Depending on the movement
of the patient on the scale, it may take several seconds for the scale to lock onto the weight.
5. Once a weight has been displayed, while the patient is still on the scale, we recommend performing a
second weighing by pressing the REWEIGH button.
6. After the weight measurement has been taken and is recorded ask the patient to step off the scale.
7. Press the ON / OFF button to turn the scale off.
Body Mass Index is another name for Quetelet Index, a formula that is a convenient and reliable
indicator of obesity. NOTE: The scale will not calculate BMI for a patient that is 24 pounds (12 kg) or less.
If a height is not entered for the patient within 30 seconds of pressing the BMI button, the scale will return to
the normal weighing mode.
Figure 4 - Batteries
WEIGHING A PATIENT
CALCULATING BMI
- 6 -
®
e2 batteries.
TM