Energy Key - Amprobe ACD-51HP Manual De Instrucciones

4.2.4. ENERGY key

With the rotary selector on "
second to activate the energy measurement. With the rotary selector switch in the
following positions:
•
W
: push the ENERGY key to start the active energy, reactive energy, apparent
energy and power factor measurements on single-phase systems. Pushing
FUNC key every single parameter value is displayed.
•
W3Φ:
push the ENERGY key to start the active energy, reactive energy, apparent
energy and power factor measurements on three phase-balanced systems.
Pushing
W W3Φ
" or "
FUNC key every parameter value is displayed.
EN - 10
" position, press and hold this key at least 1
ACD-51HP - ACD-56HPQ