Kettler ROTEO-1 Manual Del Usario página 4

07643-610_Roteo-1_3264-0313.de,en,fr,nl,es,it,pl,pt,da,cs_selec HB 29.03.13 01:38 Seite 4
!
While assembly of the product keep off children's reach
(Choking hazard - contains small parts).
!
Any other use of the equipment is prohibited and may
be dangerous. The manufacturer cannot be held liable for
damage or injury caused by improper use of the equipment.
!
Instruct people using the equipment (in particular children)
on possible sources of danger during exercising.
!
Incorrect repairs and structural modifications (e.g. removal
or replacement of original parts) may endanger the safety of the
user.
!
!
The training device should be used only for its
intended purpose, i.e. for physical exercise by adult people.
!
Before beginning your program of training, study
the instructions for training carefully.
!
• The training device has been designed in accordance with the
latest standards of safety. Any features which may have been a
possible cause of injury have been avoided or made as safe as
possible.
• The training device corresponds with DIN EN 957 -1/-9, class
HB.
• In case of enquiry, please contact your KETTLER dealer.
• Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment.
!
Ensure that your working area is free of possible sources
of danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may
not cause any danger. There is always a
children play with plastic bags!
!
Please note that there is
injury when working with tools or doing manual work. The-
refore please be careful when assembling this machine.
• Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
• Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
• The equipment must be assembled with due care by an adult
4
• Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
• Always wear suitable shoes when using.
• Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical modifications.
• In choosing the location of the apparatus, ensure a sufficient safety
distance from any obstacles. The apparatus must not be mounted
in the immediate vicinity of main passageways (paths, doorways,
corridors).
• Always observe the general safety rules and precautions for
working with electrical equipment.
• electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed might
be distorted (e.g. pulse measurement.
• The product is not suitable for use by persons weighing over 150
kg.
• Nobody may be in the moving range of a training person during
training
• The surface on which the unit is placed must be firm and even.
Place rubber or straw mats under it to deaden any noise or
impacts. Only for appliances with weights. Avoid powerful oscil-
lations of the dumbbells!
• When mounting the product please take the recommended
torque information into account (M = xx Nm).
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
• The fastening material required for each assembly step is shown
if
in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
a danger of
• Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt,
nections have been tightened firmly.
been unscrewed they no longer function correctly
• For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
Then check that all screw con-
once locknuts have
, and must be replaced.