Grillo CLIMBER 9. 27 Manual De Instrucciones página 15

TRACTION RELEASE DEVICE
The traction release device is located behind the seat; in case of emergency, to allow it to be towed or
moved by hand, move the lever outward (fig. 20). In the position shown (fig. 20A) the machine is in
working condition. Check that during working the hydraulic engine piston does not remain pressed down;
if necessary, adjust the nut (fig. 21).
DIFFERENTIAL LOCK ADJUSTMENT
The differential lock has to be activated when the pedal is half way of its travel (fig. 8). To adjust the
activation point of the differential lock use the screw (fig. 9).
PROCEDURE
check the level
Engine oil
change
check
Air filter
replace
check/adjust
Spark plug
replace
check level
Hydraulic
engine oil
replace
Check that the engine intake
grid is clean
Check that engine cooling fins
and cylinders are clean
check the level
Gearbox oil
replace
Check that blades are well-
sharpened and well-fixed
Lubricate with grease
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
LUBRICATION POINTS WITH GREASE
Climber 9.27/ Translation of the original instructions
MAINTENACE SUMMARY TABLE
EVERY 8 AFTER
HOURS 20
HOURS
●
●
●
●
●
●
12
EVERY 40 EVERY
HOURS 50
HOURS
●
●
●
EVERY EVERY
100 200
HOURS HOURS
●
‫٭‬
●
●
●
●
●
‫٭‬