Fitting The Lower Support Frame; Installing The Appliance - Gaggenau AI 230 700 Manual De Uso

Fitting the lower support frame

Attach upper and lower parts of the support frame at
the specified total height using 10 screws.
Notes
‒ Ensure that the lower support frame is in the
correct position. The open side must be facing
the control element of the cooktop.
‒ The support frame can be re-aligned by loosening
the fastening screws.

Installing the appliance

1 Hook the appliance from below into the support
frame.
Note: Ensure that the mains cable is not trapped.
2 Attach the appliance to the support frame using
2 fastening screws.
3 Hook in retaining clip and screw tight.
19