Before You Begin; Tools And Parts Needed; Parts Included; Appliance Dimensions - Gaggenau AI 230 700 Manual De Uso

Before You Begin

Tools and Parts Needed

▯
Measuring tape
▯
Pencil
▯
Phillips screwdriver (Posidrive) #2
▯
Drill with the following bits: 5/16" (8 mm)
▯
Spirit-level
▯
Aluminum tape (DO NOT use insulating tape)
▯
Exhaust channel (configuration depends on the
installation situation)
▯
Additional sheet metal screws (if necessary for
installation of the exhaust air duct)
▯
Saw

Parts Included

16

Appliance dimensions

▯
This appliance is fitted to the kitchen ceiling or a
stable suspended ceiling.
▯
Follow the enclosed installation instructions for
additional special accessories (e.g. for
circulating-air mode).
▯
The surfaces of the appliance are sensitive. Avoid
damaging them during installation.