Card remote commander
OFF
SOUND
VOL
ATT
When the POWER SELECT switch is set to the B position, the unit cannot be operated with the
card remote commander unless (SOURCE) on the unit is pressed or a cassette is inserted to
activate the unit first.
Replacing the lithium battery
When the battery becomes weak, the range of
the card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery.
4
SOURCE
DSPL
MODE
FF
PRST
SEEK
DISC
AMS
REW
µ
+ side up
The corresponding buttons of the card
remote commander control the same
functions as those on the unit.
1 OFF button
2 SOUND button
3 DSPL button
4 VOL button
5 PRST/DISC/FF-REW button
6 ATT button
7 SOURCE button
8 MODE (*) button
9 SEEK/AMS button
Notes on lithium battery
•Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
immediately consult a doctor.
•Wipe the battery with a dry cloth to assure a
good contact.
•Be sure to observe the correct polarity when
installing the battery.
•Do not hold the battery with metallic
tweezers, otherwise a short-circuit may
occur.
WARNING
The battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.