Disposal And Recycling; Maintenance And Storage - STERWINS 160HR EPW.3 Instrucciones Legales Y De Seguridad

Waste Disposal and Environmental Protection!
Be environmentally friendly. Return the tool, accessories and packaging to a
recycling center when you have finished with them.
Electrical machines do not belong in domestic waste.
Take the equipment to a waste disposal site. The plastic and metal parts that are
used can be separated out into pure grade, which allows recycling.
Any maintenance operations not covered by this chapter should be carried out by an Authorized
Sales and Service Centre.
Caution!
Always disconnect the plug from the power sources before carrying out any work
on the appliance.
• Cleaning the nozzle
--Disconnect the nozzle from the lance.
--Remove any dirt deposits from the nozzle hole using the cleaning pin.
• Cleaning the filter
Inspect the intake filter and detergent (if fitted) before each use, and clean in accordance with
the instructions.
Storage and transport
Storage
Store the machine in a dry and well-ventilated place.
When placing the machine out of service for an extended period of time, remove the cleaning
agent and drain all of the water left in the hoses.
Transport
If shipping, use the original packaging wherever possible.
Disposal
Disposing of the machine
Please check the disposal options with your local authority. Old equipment that is disposed
of separately is sent for recycling or for other forms of re-use. This helps to prevent damaging
materials from being released into the environment.
Disposing of the packaging
The packaging consists of cardboard and labeled sheets that can be recycled. Please recycle
these materials.

7. DISPOSAL AND RECYCLING

8. MAINTENANCE AND STORAGE

147
EN