GE GLE12HSLSS Manual Del Propietario E Instrucciones De Instalación página 26

Troubleshooting Tips... Before you call for service
needed, service can be scheduled by visiting us online GEAppliances.com
GEAppliances.ca
Problem
Automatic icemaker does
not work
26
Accessory Installation Instructions
Possible Causes
Freezer compartment too warm.
Icemaker is not turned on.
Icemaker is not plugged in correctly. Check that the
Water line kinked.
Water supply turned off or not
connected.
Piled up cubes in the storage bin
cause the icemaker to shut off.
Water valve is not plugged in
correctly.
What to Do
After installing the kit, allow the refrigerator to
completely cool down for 24 hours. Once the
compartment is cool, the icemaker will begin ice
production.
Move the icemaker power switch to the ON position.
Power
Switch
icemaker cord plug is
fully inserted into the
Clip Restraints onto
Locking Tabs
Hook
Check that the plastic
water line running from the valve to the water tube
restrict flow to the water line.
After installing the kit, make sure the house water
supply to the refrigerator has been turned on.
Level cubes by hand.
Check that the valve wire adapter is completely
plugged onto the terminals on the water valve. See
Adapter
Arm
Locking
Tabs
Valve Terminals
49-60769 Rev. 5