Setting the Unit
• To adjust the switch, use standard tip screwdriver if needed.
Power Indicator
The power indicator
lights when the power
is switched on.
Bass Boost Control
You can select a bass boost level from
0, 6, 9 and 12 dB.
For instruction of connecting the bass
boost remote control to the amplifier,
see the "Connection Diagram" section.
5
Top Cover
Before setting up the unit, unfasten the
screws with a 4 mm hexagonal wrench
and remove the top cover.
BFC (Beat Frequency
Control) Switch
BFC switch is on the bot-
tom of the unit. If you hear
a beat while listening to an
AM broadcast with your car
stereo, change the BFC
switch using a small stan-
dard tip screwdriver.