Cleaning And Care; Descaling - Unold 18510 Instrucciones De Uso

Ocultar thumbs Ver también para 18510:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42

CLEANING AND CARE

1.
Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2.
Wipe off the base and the kettle with a damp cloth and a little dishwashing
detergent. Do not use any abrasive scouring agents, steel wool, metal objects,
hot cleaning agents or disinfectants, since they can damage the appliance.
3.
The appliance must be completely dry on the outside before you use it
again.

DESCALING

1.
To keep the appliance operating efficiently and to prolong its service life,
it should be descaled regularly, depending on the hardness of your water.
liquid can boil over and can cause severe injuries.
4.
Heat the liquid (do not boil!) and allow it to sit for some time in the elec-
tronic kettle.
5.
Pour the descaling solution out of the kettle.
6.
Then fill it with fresh water and bring to a boil. Pour this water out as well.
Then rinse out the kettle at least twice with clean water.
Before cleaning, always turn off the appliance and unplug it
from the power supply.
Allow the appliance to cool before cleaning it.
2. The lime scale filter has to be cleaned regularly. Please
empty the kettle completely and allow it to cool off. Care-
fully remove the filter from the pour spout. Clean the filter
carefully with a soft brush under running water. You can
also place the filter in a bowl with a descaling solution.
Then rinse the filter with clear water and insert it in the
pour spout.
3. Use off-the-shelf descaling products for electronic ket-
tles and comply with the manufacturer's instructions. To
descale, fill the kettle half full, maximum, otherwise the
Copyright UNOLD AG | www.unold.de
19

Publicidad

Tabla de contenido
loading

Tabla de contenido