Operation; Cleaning And Care - Unold 8125 Instrucciones De Uso

OPERATION

1. Remove the kettle from the base.
2. Open the lid.
3. Fill the kettle with at least 0.5 liters of water. Do not fill the kettle with more
than 1.0 liters of water ("Max" marking).
4. Close the lid by pressing lightly.
5. Place the kettle level on the base.
6. Switch on the kettle by pressing the ON/OFF switch downwards into the „I"-
position. The kettle cannot be switched on if it is not properly seated on the
base.
7. When the water boils, the appliance automatically shuts off.
8. Whenever you take the kettle off the base, the appliance is automatically
switched off, even if the water is not yet boiling.
9. Of course you may also push the switch into the „O"-position to interrupt
heating.
10. If you want to boil more water, please allow the appliance to cool off for a
few minutes.
Boiling water can cause scalding. Therefore, please
handle the appliance with care when it contains hot
water.
11. The appliance features boil dry protection. When operated without water or
with excessive scaling, the appliance shuts off automatically. If this hap-
pens, please allow the appliance to cool off briefly before filling it with water
again or descale the appliance as described in the chapter "Descaling".

CLEANING AND CARE

Allow the appliance to cool before cleaning it.
Before cleaning, always turn off the appliance
and unplug it from the power supply.
1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dishwash-
ing detergent. Do not use any abrasive scouring agents, steel wool, metal
18
Copyright UNOLD AG | www.unold.de