Cleaning And Care - Unold 18020 Instrucciones De Uso

DE
7. Switch on the kettle by pressing the ON/OFF switch downwards into the
„I"-position. The kettle cannot be switched on if it is not properly seated on
EN
the base.
8. Whenever you take the kettle off the base, the appliance is automatically
FR
switched off, even if the water is not yet boiling.
NL
9. The kettle automatically stops heating at the latest when the water boils.
10. ATTENTION:
IT
The automatic switch-off only works, if the lid is correctly closed.
ES
11. Of course you may also push the switch into the „O"-position to interrupt
heating.
PL
12. CAUTION!
Ensure that the kettle is switched off before removing it from the base.
13. Please allow the product to cool down for a certain time before using the
kettle again to heat water.
14. The kettle is fitted with a dry-operation cutout that switches off the heating
elements when they become too hot, for instance when the kettle has boiled
dry. Allow the kettle to cool down. Then fill the kettle with cold water. This
will reset the cutout so that the kettle can be used again.
15. Always use fresh and cold water. Do not leave water in the kettle.
16. Switch off and unplug electrical appliances after use.
Boiling water can cause scalding. Therefore, please
handle the appliance with care when it contains hot
water.
The appliance becomes very hot during operation
and maintains the heat during some time after
disconnection.

CLEANING AND CARE

1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dishwash-
ing detergent. Do not use any abrasive scouring agents, steel wool, metal
20 von 60
Copyright UNOLD AG | www.unold.de
Before cleaning, always turn off the appliance
and unplug it from the power supply.
Allow the appliance to cool before cleaning it.
Stand 18.2.2020