HoMedics BPA-200 Manual De Instrucciones página 11

BPA-200IB_ENGSP.qxd 10/24/05
1. Press the User Select Button to choose User 1
or User 2.
After the user number is selected, press the
START/STOP button to confirm the chosen user.
2. With the cuff wrapped around your arm, press the
START/STOP button. Do not inflate the cuff unless
it is wrapped around your arm. All digits will light up
to check the display functions. The checking proce-
dure will be completed after about 2 seconds.
START
STOP
3. After all symbols disappear, the display will
show a blinking "0". The monitor is "Ready to
11:05 AM Page 19
OR
19
Measure" and will automatically inflate the
cuff to start measurement.
Note: This monitor will re-inflate automatically if the
system detects that your body requires more
pressure for measurement.
4. When the measurement is completed, the cuff will
deflate. Systolic pressure, diastolic pressure and
pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into memory.
20