Recalling Values From Memory; Clearing Values From Memory - HoMedics BPA-200 Manual De Instrucciones

BPA-200IB_ENGSP.qxd 10/24/05

RECALLING VALUES FROM MEMORY

This monitor can be used by two individuals. Each
user can store up to 60 measurements.
1. Press the User-Select button.
2. Choose User 1 or User 2.
3. Press the "M" button to
access the memory.
4. The monitor will first display
the calculated average applied
to the last 3 memories.
5. Every new press of the "M"
button will recall a previous
reading. The latest reading
will be recalled first.
11:05 AM Page 23
23

CLEARING VALUES FROM MEMORY

1. Press the User-Select button to select User 1 or
User 2.
2. Continue to press the "M" button for approxi-
mately 5 seconds, then the data for the selected
user will be erased automatically.
Note: The data stored in memory for both users may
be erased if any of the batteries are removed
or if the power source is lost when using the
AC adapter. (Users should first record the data
in a Blood Pressure log before replacing or
removing batteries or power source.)
24