OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed to
remain upright for 6 hours before plugging it in to avoid
damage to the internal components.
1. Remove the hinge cover and the upper hinge. Move
the screw hole covers from the left side to the right
side of the cabinet. Move the hole plug and bushing
from the top right side to the top left side of the
freezer door. Remove the freezer door. See fi gure A.
2. Remove the right door stopper from the bottom right
side of the freezer door. Remove the center hinge.
Move the bushing from the top right side to the top
left side of the refrigerator door. See fi gure B.
3. Remove the refrigerator door and move the hinge
hole plug from the top left side to the top right side of
the refrigerator door. See fi gure C.
4. Remove the right door stopper from the bottom of the
refrigerator door. See fi gure D.
5. Remove the lower hinge from the right side of the
cabinet, then install the lower hinge on the left side of
the cabinet. See fi gure E.
6. Get the left door stopper from the accessory bag,
install it on the bottom left side of the refrigerator
door. See fi gure F.
7. Remove the center hinge screw hole plugs and install
them in the screw holes on the right side of the
cabinet. See fi gure G.
8. Install the refrigerator door. Install the center hinge.
Get the left upper door stopper from the accessory
bag, install it on the bottom left side of the freezer
door. See fi gure H.
9. Install the freezer door. Install the upper hinge on the
top left side of the cabinet. Install the hinge cover. See
fi gure I.
1. Hinge Cover
2. Screws
3. Upper Hinge
4. Bushing
5. Screw Hole Covers
6. Hinge Hole Cover
7. Right Door Stopper
8. Center Hinge
9. Lower Hinge
10. Left Door Stopper
A
5
6
B
C
D
E
F
10
G
H
10
8
2
I
2
3
4
5
1
2
3
4
7
8
2
4
6
7
2
9
2
2
5
4
1
5
6