Gaggenau AI 442 720 AI 442 760 Instrucciones De Instalación página 14

Slide the remote fan unit into the ventilation hood
from above. Use four screws to secure it in place.
Connect the mains cable and control cable to the
control module.
14
3
For a combination with external remote fan unit
Use the network cable to connect the
AR4.. only:
external remote fan unit and the ventilation hood's
control module. The plug must snap into place.
Connect the mains cable to the control unit.
Note: The X1 and X2 connection sockets are
identical.
4 Slide the ventilation hood up into the support frame
from below and hook it into the two angle brackets
.
(a)
Note: Ensure that the mains cable is not trapped.