Attaching Flue Duct - Gaggenau AI 442 720 AI 442 760 Instrucciones De Instalación

3
Extraction mode units with external remote fan unit
AR 4..:
‒ Unscrew the connecting pieces from the cover
plate in the ventilation hood.
‒ Secure the exhaust air pipe to the connecting
piece .
(A)
‒ Screw the connecting piece to the cover plate in
the ventilation hood.
4 Connect it to the air extractor opening
5 Seal the joints appropriately.
Connecting the power supply
1 Plug the mains plug into the grounded socket.
2 If a fixed connection is required, please follow the
Electrical Connection
instructions in the

Attaching flue duct

9
WARNING
Risk of injury
Components inside the appliance may have sharp
edges. Wear protective gloves.
16
1 Remove the protective film from the flue ducts.
2 Place both parts of the upper flue duct on the
appliance such that they fit together.
Model with air extraction mode
Models with air recirculation mode
.
(B)
section.
3 Push the upper flue duct up and use two screws to
secure it at the top.