Installation: Pump Location - Franklin Electric INLINE PRESSURE Serie El Manual Del Propietario

INSTALLATION: PUMP LOCATION

s
NOTICE
!
Read and follow all instructions.
s
WARNING
!
conduit and fittings must be used to maintain Type 4 rating.
Installation Procedure: Pump
Choose a clean, well-ventilated location that provides protection from
freezing, flooding, and excessive heat. Provide access for service and
draining of the device and pump.
The device can be installed directly on the pump discharge or
between the pump discharge and first water outlet. For proper
operation, Inline Controls must be installed vertically, as indicated by
the text on the product labeling of the control unit. Ensure the flow
direction arrow is facing upwards (Figure 1).
Liquid-tight cables or flexible
Figure 2
Pump Location
Vertical Installation Only
Figure 1
Figure 3
5