Haier QPSA13 Manual Del Propietario Y Instrucciones De Instalación página 13

INSTALLATION INSTRUCTIONS
CONNECT EXHAUST HOSE TO THE
4.
WINDOW PANEL
Place the Air Conditioner close to the window ensuring
there is at least 20" of clearance from the wall and any
other obstructions. Extend the hose so that it reaches
the Window Kit. Insert the Exhaust Hose Adapter
into the opening in the Window Kit and slide it into the
locking position. Ensure that the hose runs straight to
the window with no excess extension. Important: The
Air Conditioner must be vented to the outside. Do not
use a longer hose or extend the hose included with the
Air Conditioner or the unit will not cool properly and will
overheat.
Vertical
Window
49-5000467 Rev. 0
Horizontal
Window
COMPLETE INSTALLATION
5.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
A. Plug the power cord into a grounded 3 prong
outlet.
B. Press the Reset button on the plug to ensure
the safety plug is providing power to the Air
Conditioner.
C. Allow 20" of clearance around the Air
Conditioner for proper air circulation
D. When removing the Air Conditioner, be sure to
remove the Window Kit.
13