EN
Disposal
The adjacent symbol indicates laws dictate that electrical and electronic apparatus no
longer required must be disposed of separate from domestic waste. Dispose of your
device at a collection point provided by your local public waste authority. Packaging
materials must be disposed of according to local regulations.
Observe the identification on the packaging materials during the waste sorting process;
they are identified by abbreviations (b) and numbers (a) which have the following signifi-
cance: 1–7: plastic/20–22: paper and cardboard/80–98: composite materials.
Packaging materials must be disposed of according to local regulations.
The packaging is made of environmentally friendly materials that you can dispose of
at local recycling points. Advice on the options with which to dispose of your old
device can be obtained from your municipal or local administration offices.
The device and packaging materials can be recycled; sort them for disposal to simplify
waste management. The Triman logo is only relevant for France.
The device and the packaging material can be recycled, so sort them prior to disposal for
d
c
better waste management. Contact your local authorities for information on the various
a
options available to ensure correct disposal. Observe the following identifications of the
b
packaging materials: (a) numbers, (b) abbreviations and (c) materials which have the
following significance: 1–7: plastics / 20–22: paper and cardboard / 80–98: composite materials
and (d) type of packaging. The logo is only applicable to Italy.
Information on Storage
The laminator must be stored safely after use. Observe the following information:
Store the laminator
■
in its original packaging
■
in a dry, clean location
■
in a cooled state
- 28 -