Fiamma Prestige Revolution Atlantic Manual De Instrucciones página 8

COFFEE MACHINES "PRESTIGE REVOL. AND ATLANTIC" MODELS
This manual applies to all "PRESTIGE REVOL. and ATLANTIC" models, semi-automatic and
digital electronic with volumetric control (C.V.).
INSTALLATION
Before installing the machine, make sure that the machine has all the required conditions to
work correctly.
Therefore:
1 - Check that the electrical installation has all the conditions in order to work correctly.
1.1. - Check if the power supply corresponds to the one required for the
machine (see the ID plate)
1.2. - Check if there is a suitable earth circuit.
1.3. - Check if the available power is suitable for the machine power.
1.4. - The electrical board should have a protection of 30 mA and a
circuit breaker with a 3mm separation from the contacts.
2 - Check that the water circuit has the required conditions for installation:
2.1. - A supply tap and a 3/8 pipe connection to connect to the supply pipe.
3 - Check that there is an accessible discharge pipe that can hold a pipe with 16/17 mm.
4 - Space to place machine purifier.
IMPORTANT
"THE EARTH CONNECTION IS COMPULSORY"
The machine is to be connected to an electric fixed installation and thus the use of wall sockets,
multiple plugs or extension cords is strictly forbidden.
For installation follow the scheme in Fig. 1.
- Place the machine correctly on the counter.
- Find a suitable place and position for the purifier n. 12 and connect the purifier to tap n.
14 through tube n. 13
- After having connected the purifier and before connecting it to the machine, run the
water until it comes out clean, as new purifiers can have some residues.
- Connect the purifier to the filter-holder n. 16 by using the tube n. 11.
- Carry out the electric connections by joining the conductor nº. 5 to the circuit-breaker
nº. 2.
8