4.2 Adjusting minimum gas supply
To ensure minimum gas supply is correctly
adjusted, remove the knob and proceed as
follows:
•
Tighten screw to reduce flame height (–).
•
Loosen screw to increase flame height (+).
•
The adjustment must be performed
with minimum gas supply setting
(small flame
).
•
The primary air of the burners does not
need to be adjusted.
Manual W10777748.indd 34
Manual W10777748.indd 34
•
Light up the burners and turn the knobs
from max position
flame stability.
Upon completion of the adjustment, reseal
using wax or an equivalent material.
34
to min
to check
F
02/09/15 09:23
02/09/15 09:23