Kohler Finial K-318 Guia De Instalacion página 8

8. Install the Robe Hook
Start a setscrew into each post. Do not thread fully into the post.
If included, slide an escutcheon onto the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the robe hook assembly over the wall plate.
Tighten the setscrew with a hex wrench.
9. Install the Soap Dish
Start a setscrew into the post. Do not thread fully into the post.
If included, place an escutcheon on the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the soap dish assembly over the wall plate.
Tighten the setscrew with a hex wrench.
Install the O-ring into the groove in the soap dish post.
With a twisting motion, snap the soap dish into place on the soap
dish post.
1020818-2-A 8 Kohler Co.