JVC KD-AR960 Manual De Instrucciones página 32

Indications
Contrast
Contrast
LCD Type
Display type
Font Type
Font type
ID3 Tag
Tag display
Theme
Audio level meter
IF Filter
Intermediate
frequency filter
AreaChange
Tuner channel
interval
Sirius ID*
2
SIRIUS ID
®
Beep
Key-touch tone
Ext Input* 3
External input
32
Selectable settings, [reference page]
1 – 10: Adjust the display contrast to make the display indications
clear and legible.
[Initial: 5]
Auto: [Initial]; Positive pattern will be selected during the day
time* ; while negative pattern will be used during the night
1
time* 1 .
Positive: Positive pattern of the display.
Negative: Negative pattern of the display (except still images and
animations).
You can select the font type on the display.
1 [Initial] O 2
On: [Initial]; To shows the ID3 tag display while playing MP3/WMA
tracks, [13, 14, 16].
Off: Cancels.
You can select the level meter during playback.
SRC Anime (Source Animation) [Initial] O Meter 1 O Meter 2 O
Meter 3 O (back to the beginning)
• Press DISP repeatedly to show the selected level meter.
Auto: [Initial]; Increases the tuner selectivity to reduce interference
noises between the stations. (Stereo effect will also be lost.)
Wide: Subject to the interference noises from adjacent stations, but
sound quality will not be degraded and remaining the stereo
effect.
EU: Select this when using the receiver in an area other than North and
South America. (FM: 50 kHz—manual tuning, 100 kHz—auto
search; AM: 9 kHz)
US: [Initial]; Select this when using the receiver in North or South
America. (FM: 200 kHz; AM: 10 kHz)
The 12-digits SIRIUS identification number is shown on the display,
[40].
On: [Initial]; Activates the key-touch tone.
Off: Deactivates the key-touch tone.
Changer: [Initial]; To use a JVC CD changer, [14].
Ext In:
To use any external component (other than SIRIUS DLP),
[39].