Product Components - Hoover FM216LI011 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Do not use your appliance out of doors or on any wet surface or for
wet pick up.
Do not pick up hard or sharp objects, matches, hot ashes, cigarette
ends or other similar items.
Do not spray with or pick up flammable liquids, cleaning fluids,
aerosols or their vapours.
Do not run over the power cord when using your appliance or remove
the plug by pulling on the power cord.
Do not continue to use your appliance or charger if it appears faulty.
Hoover service: To ensure the continued safe and efficient operation
of this appliance we recommend that any servicing or repairs are
only carried out by an authorised Hoover service engineer.
Do not use the appliance to clean animals or people.
Do not replace the batteries with non-rechargeable batteries.
the environment
The symbol on this appliance indicates that this appliance may not be treated as household
waste. Instead it must be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local
environmental regulations for waste disposal. For more detailed information about treatment,
recovery and recycling of this appliance, please contact your local city office, your household
and waste disposal service or the shop where you purchased the appliance.
This product complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

Main Cleaner
A. Carpet and Floor Nozzle
B. Main Body
C. Handheld Release Button
D. Handle Release Button
On/Off Switch
E.
F. Product Holder
G. Charger
H. Handheld Unit
I. Crevice Tool / Dusting Brush
J. Nozzle Release Button
PREPARINg yOUR ClEANER
1. Unfold the handle from the main body until it locks in place. [1]
2. Line up the nozzle with the main body and firmly push into the main body until the nozzle locks in
place. [2]
3. For first use, charge your cleaner for 6Hrs and completely discharged. After first use the normal
charging time is 5Hrs.
4. The indicator light will blink when charging and remain lit when fully charged. [3]
5. Fix the Product Holder to your wall using the screw and holder provided.
* Certain Models Only
Handheld Cleaner
K. On/Off Switch
L. Charging/Power Indicator
M. Dust Container Release Button
N. Dust Container
Filter
O. Mesh filter
P. Cloth Filter
2
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido