Thrustmaster HOTAS Warthog Manual Del Usuario página 16

INSTALLING THE JOYSTICK IN A COCKPIT OR OTHER FIXED SUPPORT
To attach the joystick in a cockpit:
- Unscrew the 4 screws located underneath the joystick's metal base plate, and remove the
metal base plate.
- Use the 4 screw threads located on the underside of the joystick to attach the joystick
directly to your fixed support.
You can also use the 4 holes located in the corners of the metal base plates of the joystick
and the throttle to attach both elements to a fixed support.
THROTTLE ADJUSTABLE FRICTION SYSTEM
- To increase the friction: turn the wheel to the right.
- To decrease the friction: turn the wheel to the left.
IMPORTANT NOTES:
- Friction on the dual throttles is set to the minimum value by default.
- In order to allow for precise adjustment according to your taste, roughly ten full turns must
be made to go from minimum friction to maximum friction.
- You can use the white mark, found on the wheel, to help count your turns, if necessary.
15/18