Hunter 82003 Manual De Instrucciones página 9

B16
Fan Motor
Light
*Option Fan & Main Light Together
B17
G
Install the wiring cover plate. Make sure all wiring
connections are inside the box or under
B19
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
41945-01 3/29/2006
05-HF-021-EngS_3.29.06.indd 9
Black
2 Pin
White
White
3 Pin
Black Light
*Option
F
the wiring cover plate.
H
the motor and the housing.
Ground
Green
A
Connect wires as shown.
B18
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
B20
I
Secure the motor by tightening the 2 screws.
Bare Copper
Black Main Switch 1 (AC In)
White
Black Switch 2 (AC In)
H
9
3/29/06 7:15:49 PM