Graco SnugRIDE Click Connect 40 Manual página 31

8. NEVER put two LATCH connectors on one
vehicle LATCH anchor
9. Test child restraint for secure installation as
described in child restraint "Final Safety
Check" page 41.
10. Check that the LATCH stays tight and does not
slip from the tightened position. If it does not stay
tight, try another seating position or contact
Graco at 1-800-345-4109.
11. To remove LATCH, push button while
pulling on the LATCH belt as shown
12. Press and hold LATCH release hinge
13. Push connector in, lift connector up and
pull out (away from anchor point)
14. Repeat steps 12 and 13 for other connector.
.
.
.
31