8.0 Additional Information
8.1 Airplane Use
When installing in an airplane using the base, install the same way as in
an automobile with a lap only belt leaving the lock-off unlatched to allow
for buckle clearance. If using the shell only
installation, follow the same instructions as in an
automobile. Notify the airline ahead of time that
you intend to bring the seat on board.
Use only in forward-facing aircraft seats. Follow the flight attendants
instructions about child restraint placement. Do not use this child restraint
if the airplane seat belt does not hold the child restraint securely.
8.2 Storing LATCH
1.
For ease of storing, extend
LATCH to its maximum length
2.
Locate the storage compartment
door on front of child restraint base .
3.
Insert LATCH into storage compartment
and shut storage compartment door.
4.
LATCH storage should look
like this when complete
.
.
42