Dishwasher Features - KitchenAid W10596242A Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ProScrub
Option Wash Area
®
The ProScrub
®
option wash area is located at the back of the lower
level rack.
Back of
dishwasher
NOTE: You must select the ProScrub
Make sure items do not interfere with the water feed tube, spray
arms, or ProScrub
®
spray jets.
Keep the last tine row in the back of the lower rack in the 60°
angled position when using the ProScrub
Load pans, casserole dishes, etc. in the back of the lower dish
rack with the soiled surfaces facing the ProScrub
and resting on the last row of tines in the angled position
Only one row of items may face the ProScrub
Stacking, overlapping or nesting items will keep the ProScrub
spray jets from contacting all of the surfaces.
Silverware Basket
Use the slots in the covers to
keep your silverware separated
for optimum wash. There are
specially designed slots (small
round holes) for chopsticks. Mix
silverware types to keep them
separated. Load knives down,
forks up, and alternate spoons,
for best cleaning results.
NOTE: If your silverware
does not fit into the
designated slots, flip the
covers up and push them
down into the basket.
®
CULINARY CADDY
Utensil Basket
Use the utensil basket to hold
specialty cooking utensils (serving
spoons, spatulas, and similar items),
or overflow silverware items.
The basket hangs on the bottom rack
in the right-hand corner. Load the
basket while it is on the bottom rack or
remove the basket for loading on a
counter or table.
NOTE: Spin the spray arms while the
bottom rack is inside the dishwasher
to be sure items in the basket do not
stop the rotation of the arms.
10

Dishwasher Features

Your KitchenAid dishwasher may have some or all of these features.
®
option to use this feature.
®
option.
®
spray jets,
.
®
spray jets.
Manual Adjustable 2-Position Top Rack
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Adjusters are located on each side of the top rack.
Raise the top rack to accommodate items up to 9" (22 cm) in the
top rack and 13" (33 cm) in the bottom rack, or lower the top rack
to accommodate items up to 11" (28 cm) in both the top and
bottom racks.
IMPORTANT: Remove dishes prior to removing the top rack from
the dishwasher.
1. To raise, remove rack and slide lower wheels into the rails as
directed in "Removable Top Rack" section.
2. To lower, remove rack and slide upper wheels into the rails as
directed in "Removable Top Rack" section.
®
Premium Adjustable 2-Position Top Rack
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Adjusters are located on each side of the top rack.
Each adjuster has 2 preset positions.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level.
To lower the rack, press
both rack adjusters and
slide the rack to its
Down position and level.
FLEXI-FOLD DOWN
The row of tines on the left-hand and
right-hand sides of the top rack can
be adjusted to make room for a
variety of dishes.
To adjust the fold-down tines:
1. Grasp the tip of the tine that is in
the tine holder.
2. Gently push the tine out of the
holder.
3. Lay the tines down, toward the
center of the rack.
NOTE: The bottom rack may also have 1 or 2 rows of flexible tines
located in the back of the rack. Follow the same instructions to
adjust.
Flexible Tines

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido