Dmx Linking - Chauvet Professional COLORado 2-Quad Zoom VW Tour Guía De Referencia Rápida

All manuals and user guides at all-guides.com
COLORado™ 2-Quad Zoom VW Tour QRG EN
AC Power This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Power Linking You can link up to 13 COLORado™ 2-Quad Zoom VW Tour products at
120 V, 16 products at 208 V, or 17 products at 230 V. Never exceed this
number. Power linking cords can be purchased separately.
AC Plug
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

DMX Linking

The COLORado™ 2-Quad Zoom VW Tour will work with a DMX controller
using a regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
DMX Connection The COLORado™ 2-Quad Zoom VW Tour uses a regular DMX data
connection for its DMX personalities: STD.P, STD.Y, STD.W, and UNO. See
the User Manual to connect and configure for DMX operation.
Note: For optimum control of the 16-bit (fine control) dimming channels in
the STD.P, STD.Y, and STD.W personalities, be sure that both dimming
curves in SET > DIM and SET > CURV are set to OFF.
Master/Slave The COLORado™ 2-Quad Zoom VW Tour uses the DMX data connection for
its Master/Slave mode. See the User Manual to connect and configure for
Connection
Master/Slave operation.
3