Dmx Linking - Chauvet Professional COLORdash Par-Q12 IP La Guía De Referencia Rápida

COLORdash Par-Q12 IP QRG
What Is
Included
AC Power
Power Linking
AC Plug
IP Rated Plug
Caps

DMX Linking

DMX Connection
Master/Slave
Connection
·
COLORdash Par-Q12 IP
·
IP65 Rated Power Input Cord
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
You can link up to 13 COLORdash Par-Q12 IP products at 120 V, 23 products at
208 V, or 25 products at 230 V. Never exceed this number. Power linking cords
can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
·
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from power via breaker
or by unplugging it.
·
When using this product in an outdoor IP65 type environment, be sure
to use IP65 (or higher) rated power cables and secure unused ports
with attached IP65 covers.
The COLORdash Par-Q12 IP has IP65 covers for all ports: DMX In and Out,
Seetronic Power In and Power Out
The COLORdash Par-Q12 IP will work with a DMX controller using a 3- or
5-pin DMX serial connection. A DMX Primer is available from
http://www.chauvetlighting.com/downloads/DMX_Primer_Rev9_ML_WO.pdf.
The COLORdash Par-Q12 IP uses a 3- or 5-pin DMX data connection for its DMX
personalities: 4CH, 6CH and 11CH. See the User Manual for information about
connecting and configuring the product for DMX operation.
When using this product in an outdoor IP65 type environment, be sure to use
IP65 (or higher) rated data cables and secure unused ports with attached IP65
covers.
The COLORdash Par-Q12 IP uses the DMX data connection for its Master/Slave
mode. See the User Manual for information about connect and configure the
product for master/slave operation.
·
·
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Warranty Card
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue Silver
Green
Secure any unused ports
with the attached IP65
covers
EN