Handling Records; Cleaning; Precautions - THOMSON TT600BT Modo De Empleo

2. PHONO/LINE Selection Switch
• PHONO: Signals that have been amplified by the built-in equalizer amp are output from the analog
audio output jacks.
• LINE: Use this when connecting to equipment that has PHONO inputs.
Caution
When set to ON, if connected to the PHONO inputs of an amplifier, for example, the output from
speakers and headphones will be very loud, which could damage equipment or harm hearing.
3. PC encoding
4. DC input connector
• After completing all other connections, connect the included AC adapter to this jack.
• Confirm that the power plug of the AC adapter is plugged into a power outlet.
• Unplug the power cord from the outlet when you are not planning to use the unit for an extended
period.
• Do not use any AC adapter other than the one included.
Note
• Be sure to connect the power cord to an AC outlet that supplies the correct voltage. Connection to
an outlet that supplies the incorrect voltage could cause fire or electric shock.
• Hold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on the power
cord.
• Unplug the power cord from the outlet when you are not planning to use the unit for an extended
period of time.
5. Power ON/OFF button
• Switch the ON button to turn the unit on or turn off.
6. BT transmitter ON/OFF button
• Switch the ON button to activate Bluetooth or turn it off.

Handling records

Holding records

Cleaning

• Fingerprints and dust on a record can cause noise and the sound to skip, as well as damage the
record itself and the stylus. Use a commercially available record cleaner to clean records. Do not
use thinner or anything other than a record cleaner. Such chemicals could harm the surface of the
record.
• When using a record cleaner, wipe the surface of the record in a circular motion, following the
grooves.

Precautions

• Do not leave records in places that are exposed to direct sunlight or are very hot or very humid.
Leaving a record in such a condition for a long time could result in warping or other damage.
• Do not stack multiple records or place heavy objects on top of them. Do not leave records at an
angle for long amounts of time either. Doing so could result in warping or other damage.
• Do not allow hard objects to directly touch the audio grooves. Doing so could cause scratches.
When holding a record or removing it from its sleeve, avoid
touching the grooves by holding the record by its label and
edge with one hand or by holding it by its edge with both hands.
- EN 7 -