Safety Instructions - Einhell Royal HW 810 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Anl.
HW 810
14.03.2005
GB

1. Safety instructions

Please read these directions for use carefully
and note their instructions. Use these directions
for use to learn about the appliance, its correct
use and essential safety precautions.
Take suitable action to keep children away from
the appliance.
The user is responsible for the safety of third
parties within the appliance's radius of action.
Before starting up the appliance, have a
specialist check that the necessary electrical
safeguards are installed.
No persons are permitted in the pumped medium
while the house waterworks is in operation.
Use of the house waterworks at swimming-pools,
garden ponds, shallow ponds, fountains and the
like is permitted only in conjunction with an earth-
leakage circuit-breaker (max. earth leakage 30
mA in accordance with VDE Regulations Part
702). Please ask your electrician.
Carry out a visual inspection each time before
you use the appliance. Never use the appliance
if any of its safety devices are damaged or worn.
Never deactivate any safety devices.
Use the appliance only for the purpose described
in these directions for use.
You are responsible for safety within the
appliance's radius of action.
Never repair a cable or plug damaged by
external influences! The cable must be replaced
by a new one. Have this work carried out only by
a qualified electrician.
Your mains voltage must match the voltage
quoted on the rating plate of the house
waterworks (230 V AC).
Never lift, transport or fasten the house
waterworks by its power cable.
Make sure that the electric plug connections are
positioned where they are safe from flooding and
protected from moisture.
Always pull out the power plug before carrying
out any work on the house waterworks.
Avoid exposing the house waterworks to a direct
water jet.
The user-owner is responsible for observing local
regulations concerning the safety and installation
of equipment. (Ask a qualified electrician if you
are uncertain.)
6
9:38 Uhr
Seite 6
The user must take suitable precautions (e.g.
installing an alarm system, a reserve pump or
similar) to prevent damage resulting from flooded
rooms caused by faults in the house waterworks.
If the house waterworks fails, have it repaired
only by a qualified electrician or your ISC
Customer Service.
Use only Einhell replacement parts.
Never allow the house waterworks to run dry and
never operate it with fully closed suction power. If
the house waterworks is damaged due to dry
running, the manufacturer's warranty shall be
cancelled.
2. Stability
The maximum temperature of the pumped medium
should not exceed +35°C in continuous duty.
It is prohibited to use this pump to convey
combustible, gassing or explosive liquids.
The pumping of aggressive liquids (acids, alkalis, silo
leakage etc.) and liquids containing abrasive
substances (sand) should also be avoided.
3. Intended use
Applications
Irrigation and watering of green areas, vegetable
beds and gardens.
Operation of lawn sprinklers.
Drawing of water (with pre-filter) from ponds,
streams, rain barrels, rainwater cisterns and
wells.
Supplying water to the house.
Pumped media
Clear water (fresh water), rain water or mild suds /
service water.
4. Operating instructions
As a basic rule we recommend using a pre-filter and
a suction set consisting of a suction hose, a suction
basket and a non-return valve in order to prevent
lengthy re-priming times and unnecessary damage to
the pump by stones and solid foreign bodies.

Publicidad

Tabla de contenido
loading

Tabla de contenido