Manuales relacionados para Sanus OLL15
Resumen de contenidos para Sanus OLL15
- Página 1 OLL 15 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help!
- Página 2 No — Perfect! (including accessories) 130 lb weigh MORE than Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call (59 kg) 130 lb (59 kg) ? 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. What is your...
- Página 3 Dimensions 25.4 [cm] [64.5] UP TO 26.6 [67.5] [9.9] [16.6] 15.9 [2.5] [40.5] 17.2 [43.7] [8.5] OFFSET 28.1 [71.4]...
- Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 5 Parts and Hardware for STEP 2 Lag Bolts 5⁄16 2 3⁄ 4 Washers (Lag Bolts) 5⁄16 For concrete installations ONLY CAUTION : Do not use in drywall or wood Concrete Anchor Fischer UX10 x 60R...
- Página 6 STEP 1 Attach Brackets to TV Standard configurations 1-1 Select TV Screw Diameter 1-2 Select TV Screw Length are shown. For special applications, or if you are uncertain about your Hand thread screws into the threaded For flat-back TVs, Spacers supplied for: hardware selection, inserts on the back of your TV to...
- Página 7 1-3 Attach TV Brackets Ensure that your brackets are centered and level on the back of the TV and install using the spacer, screw and washer combination you selected for your TV. CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the TV screws only enough to secure the TV brackets to the TV.
- Página 8 STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm) ●...
- Página 9 Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template IMPORTANT: Be sure to drill into the center of the studs. IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Install wall plate using four lag bolts and four washers...
- Página 10 STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! ● Mount the wall plate directly onto the concrete surface ● Minimum solid concrete thickness: 8 in. (203 mm) ●...
- Página 11 Remove the wall plate template and insert four anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install wall plate using four lag bolts and four washers . Tighten the lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolt...
- Página 12 STEP 3 Attach TV to Wall Plate HEAVY! You may need assistance with this step. IMPORTANT: You will hear an audible click when the TV bracket is securely fastened to the wall plate.
- Página 13 Adjustments LEVEL LATERAL SHIFT REMOVING THE TV HEAVY HEAVY ! You may need ! You may need If needed, tighten one of the screws on assistance with this step. assistance with this step. the top of the TV bracket to level the TV. Slide the TV left or right along the Pull down on the straps and lift the TV up wall plate...
-
Página 14: Listo Para Comenzar
No — ¡Perfecto! más de 59 kg 59 kg (130 lb), incluidos Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al (130 lb) los accesorios? 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿De qué está... -
Página 15: Paso 1 Colocar La Placa De Sujeción En El Televisor
ESPAÑOL Dimensiones Ver página 3 Piezas y elementos de sujeción suministrados Ver página 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;... - Página 16 ESPAÑOL PASO 2A Fijar la placa mural a la pared - Opción para montantes de madera Ver página 8 PRECAUCIÓN: Evite posibles lesiones personales y daños materiales. ● El yeso que recubre la pared no debe exceder los 16 mm (5/8 pulgada). ●...
-
Página 17: Paso 3 Instalar El Televisor En La Pared
ESPAÑOL Coloque la plantilla de la placa mural en la pared a la altura que desee. Nivele la plantilla de la placa mural y marque la ubicación de los orificios. Realice los orificios guía con una mecha para mampostería de 10 mm (3/8’’) de diámetro. IMPORTANTE: Los orificios guía deben realizarse hasta una profundidad de 75 mm (3’’). - Página 18 ESPAÑOL Ajustes Ver página 13 AJUSTE DE LA NIVELACIÓN DESPLAZAMIENTO LATERAL DEL TELEVISOR RETIRAR EL TELEVISOR ¡ELEMENTO PESADO! ¡ELEMENTO PESADO! Es posible que necesite Es posible que necesite Si es necesario, ajuste uno de los tornillos ayuda en este paso. ayuda en este paso.
- Página 20 Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Find us on Facebook: SANUS Follow us on Twitter @sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.