Bestron DC30T Manual Del Usuario página 42

OPERATION - General
The appliance is intended only for
domestic use, not for professional
use.
1. Mounting plate
2. Canopy
3. Down rod
4. Motor
5. Fan blades (6x)
6. Fan blade holder (6x)
7. Screws mounting plate (2x)
8. Screw set canopy (3x)
9. Screw set fan blades (18x)
10. Balance weight (2x)
11. Balance clamp
12. Glass lamp cover
MONTAGE - Installing the mouting plate
WARNING:
• ALWAYS SWITCH OFF THE MAINS POWER BEFORE INSTALLING OR CARYING OUT ANY WORK
ON THE CEILING FAN.
• Be sure to hang the fan in a place where the distance between the fan blades and the floor will be at
least 2.30m.
1
2
A
1. In the packaging the mounting plate is already assembled to the canopy by four screws (see figure A).
2. Loosen the two screws
3. Unscrew the two screws
D
4. Remove the mounting plate from the canopy and unscrew the yellow-green earth wire from the canopy (D).
1
5
7
8
9
2
1
halfway (B).
1
completely and remove them (C).
2
E
2 3
6
10 11
1
B
F
42
4
12
2
C
G
EN