Maintenance Schedule; Moisture In Compressed Air - Campbell Hausfeld HU500000 Manual Del Usuario

Maintenance (Continued)
OperatIOn
DRAIN TANK
CHECK AIR FILTER
CHECK SAFETY VALVE
CLEAN UNIT
notes

MaIntenanCe SCHeDUle

DaIly
l
Weekly MOntHly
l
l
l
7
HU500000, HU502000

MOIStUre In COMpreSSeD aIr

Moisture in compressed air will form
into droplets as it comes from an air
compressor pump. When humidity
is high or when a compressor is in
continuous use for an extended
period of time, this moisture will
collect in the tank. When using a
paint spray or sandblast gun, this
water will be carried from the tank
through the hose, and out of the
gun as droplets mixed with the spray
material.
IMpOrtant: This condensation will
cause water spots in a paint job,
especially when spraying other than
water based paints. If sandblasting, it
will cause the sand to cake and clog
the gun, rendering it ineffective.
A filter in the air line, located as
near to the gun as possible, will help
eliminate this moisture.
www.chpower.com