Technical Service; Maintenance Schedule - Campbell Hausfeld VT636600 Instrucciones De Operación

Maintenance (Continued)
h . Reattach belt .
i . Reattach belt guard .
7 . Change oil .
a . Allow compressor to run and
warm up oil . Unplug unit .
b . Position a pan under pump end of
unit .
c . Remove oil drain plug (See
Figures 10 and 11) . Allow oil to
collect in pan .
d . Replace drain plug, fill pump to
full level (See Figures 10 and 11) .
Use Mobil 1 10W-30 synthetic
®
motor oil .
notes

MaInTenanCe SCheDUle

OpeRaTIOn
CHECK OIL LEVEL
DRAIN TANK
CHECK AIR FILTER
CHECK SAFETY VALVE
CLEAN UNIT
CHECK BELT TIGHTNESS
CHANGE OIL

TeChnICal SeRVICe

For information regarding the
operation or repair of this product,
please call 1-800-543-6400 .
7
DaIly Weekly
l
l
l
l
VT636600
MOnThly 3 MOnThS
l
l
l
www .chpower .com