Designation; -Nominal Calorific Power; Description And Dimensions; Description - deville C07925555 Instrucciones Para La Instalación Y El Uso

You are advised to have a thorough and
careful reading of the instructions for use in
order to get the best use and satisfaction of
your DEVILLE appliance.
The fact of not respecting the fixing, the
installing and the use istructions involves the
responsibility of the person who doesn't
respect them.
THIS STOVE MUST BE INSTALLED IN
ACCORDANCE TO THE CURRENT D.T.U.
SPECIFICATIONS..
The stove must be installed by a skilled
professional.
All the local and national regulations as well
as the European standards have to be
respected when the stove is used.
The appliance mustn't be modified.

1 - DESIGNATION

The stove is in line with the essential requirements of
the directive 89/106/CEE Produits de Construction
according to the annexe ZA of the EN 13229 standard.
It is a intermittent and continuous combustion heating
appliance with grate which exclusively works with wood
with a semi-closed combustion chamber and which is
designed to be fitted in a chimney to be built.
Note down the serial number written on the descriptive
plate stuck on the appliance and on the certificate of
guarantee, write it down in the following box :
Serial number
This number will be necessary to identify your appliance
when spare parts will be needed.
Appliance is standard
Electromagnetic Compatibility Instruction modified by
the 93/68/EEC instruction.
2 – CALORIFIC NOMINAL POWER
Nominal Draught Smoke output / weight
power
12 kW 12 Pa
Intermittent and continuous running :
The intermittent running needs a reload every three
quarters of an hour.
This choice of operation is to be favoured as it is
environmentally-friendly.
The appliance can also ensure a continuous running
when the intemittent constraints can't be respected or
when a reduced power is wanted.
Nominal calorific power with an intermittent working:
to the 89/336/EEC
Smoke
temperatures
9,2 g/s 354 °C
. Obtained with a 12 Pa draught with a fire lasting ¾ of
an hour, with a loading of 2,84 kg of hard wood
(hornbeam, oak ...) in the form of 2 split wood logs of
about 9 cm diametre.
. To get this heat power, reload on an ash bed of about
500 g that is to say 4 cm thick.
. The given power is the average power obtained in the
tests with the the air intake damper opened to its
maximum.
The slow combustion :
. Obtained with a 6 Pa draught, with the air intake
damper closed
. Reload on an ash bed of about 500 g (4 cm thick).
. It can last over 3 hours with an unsplit log of hard
wood weighing 4 kg.
. It can last over 10 hours with an unsplit log of hard
wood of a large diametre weighing between 6 and10
kg.
Normal speed conditions allow to get a maximum
power which is not to be exceeded to guarantee a
running in complete safety.
The maximum loading is 15 kg of wood

3 - DESCRIPTION AND DIMENSIONS

3.1 - Description

The main parts of your appliance are shown and
marked out on Fig. 1.
The combustion chamber is made of steel (4mm thick),
the bottom of the hearth is lined with a cast iron back
plate.
A metal sheet casing allows a cooling air flow around
the chamber of combustion and protects the walls of
the mantelpiece from radiance : it is a guarantee of
safety and performance.
The cast iron door is fitted with seals which ensure
smoketightness and allow a large autonomy of working.
The air damper, situated at the bottom of the door
allows to choose a fire speed.
An extra air intake is built in the upper part of the
window to keep it clean and ensure a better burning of
the wood.
A two-speed blower allows to activate the hot air
circulation. This equipment allows to send a hot air flow
in four different directions (adjoining rooms). Without
shaft, it will improve the convection where your
appliance is.
Blower output : 100 m³/h
Net weight of the appliance
Gross weight (without door,
deflector, grate, back plate)
3.2 - Dimensions (Fig. 2)
14
C07925
140 kg
90 kg