Mounting Or Removing Armrest - Vermeiren Express VB Manual De Instrucciones

To remove the battery housings of the electric wheelchair:
1. Loosen the star knob .
2. Rotate the plate  upwards and to the left.
3. Grasp the handgrip  of the first battery housing (with thermal fuse) .
4. Slide the battery housing backwards until the battery connectors  come loose.
5. Lift the first battery housing  out the wheelchair.
6. Slide the second battery housing  backwards until you can lift the housing out the
wheelchair frame.
7. Lift the second battery housing  out the wheelchair.
2.7

Mounting or removing armrest

L
Risk of injury and/or damage - Make sure that the levers  are
WARNING:
properly tightened before using the wheelchair.
L
WARNING:
Risk of tipping over - Check that the armrests are at the same height
on each side.
L
CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points of the armrests.
The armrests can be removed so the patient can be moved sideways. The armrests
can also be removed for therapeutic purposes and to move the patient from the wheelchair.
The armrests are adjustable in different heights over a range of 90 mm (stepless). Keep a
safe distance from 10 mm on the bottom of the armrest.
1. Loosen the lever  a little.
2. Move the rectangular tubes
3. Retighten the lever  hand-tightened.
4. Check that the lever  is securely fixed.
5. Adjust the other armrest with the same instructions.
To mount the armrests on the electric wheelchair:
1. Mount the armrests  in the rectangular tube .
2. Retighten the handle  properly. (If the lever of handle
 is not in a good position, press on button  on the
handle and place the lever  in a good position that no
risk of injury to the hands can appear.)
To remove the armrests from the electric wheelchair:
1. Turn on the handle  until it come loose. (If the lever
of handle  is not in a good position, press on button
 on the handle and place the lever  in a good
position that no risk of injury to the hands can appear.)
2. Remove the armrests  out the rectangular tube .
 
and over each other until the desired armrest height.
Page 12
Express VB
2016-08