EN
2.4
Mounting or removing of the footrests
2.5
Operating the brakes
"
!
WARNING:
movements ! Use the brake only to prevent the wheelchair from unintended
movements.
"
!
WARNING:
"#$%&'($&%(#$)#*)%+,)%(-,.)/0&%,-1)#(21)'341)56)! Check the condition of the tires
before each use.
"
!
WARNING:
brakes before each use.
The mounting of the footrests is done as follows:
1.
2.
3.
To take off the footrests:
1.
2.
3.
The brakes are no used to slow down the wheelchair during
Good operation of the brakes is influenced by wear and
The brakes are adjustable and can wear ! Check the operation of the
To apply the brakes:
1.
"
!
To release the brakes:
1.
2.
3.
Hold the footrest sideways at the outside of the
wheelchairs frame and mount the tube hood
into the frame.
Turn the footrest inwards till it clicks in position.
Turn the foot plate downwards.
"
Pull handle
.
Turn the footrest to the outside of the
wheelchair till it comes loose from the
guidance.
Pull the footrest from tube hood
Push the brake handles ! forward till you feel a
distinctive click.
Risk of unintended movement !
CAUTION:
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
Release one brake by pulling the handle !
backwards.
Hold the hand-rim of the release wheel with
your hand.
Release the second brake by pulling the handle
backwards.
!"#$%&/%
Jazz, Jazz 30°
2011-01
!
!
.